60° Elbow HDPE100+, a prefabricated fitting used in polyethylene pipe lines for applications requiring a sixty degree directional change. Manufactured by welding pipe sections together and creates a secure transition in the line.
The product is manufactured from HDPE100+ raw material in PN10 (SDR 17) and PN16 (SDR 11) pressure classes and is offered in diameter range starting from Ø200. It is connected to the pipe line using the butt welding method.
| d | Article No Bar L Z e Weight (kg) Pack (pcs) |
|---|---|
| Ø200 | DR601000020012 PN10 130 263 11,9 3,53 1 |
| DR601600020012 | PN16 130 263 18,2 5,20 1 |
| Ø225 | DR601000022512 PN10 130 270 13,4 4,63 1 |
| DR601600022512 | PN16 130 270 20,5 6,80 1 |
| Ø250 | DR601000025012 PN10 130 277 14,8 5,97 1 |
| DR601600025012 | PN16 130 277 22,7 8,80 1 |
| Ø280 | DR601000028012 PN10 130 286 16,6 7,84 1 |
| DR601600028012 | PN16 130 286 25,4 11,62 1 |
| Ø315 | DR601000031512 PN10 170 359 18,7 11,94 1 |
| DR601600031512 | PN16 170 359 28,6 17,57 1 |
| Ø355 | DR601000035512 PN10 170 371 21,1 16,03 1 |
| DR601600035512 | PN16 170 371 32,2 23,57 1 |
| Ø400 | DR601000040012 PN10 170 383 23,7 21,53 1 |
| DR601600040012 | PN16 170 383 36,3 31,76 1 |
| Ø450 | DR601000045012 PN10 170 398 26,7 28,94 1 |
| DR601600045012 | PN16 170 398 40,9 42,76 1 |
| Ø500 | DR601000050012 PN10 170 413 29,7 37,94 1 |
| DR601600050012 | PN16 170 413 45,4 55,87 1 |
| Ø560 | DR601000056012 PN10 170 430 33,2 50,66 1 |
| DR601600056012 | PN16 170 430 50,8 74,70 1 |
| Ø630 | DR601000063012 PN10 220 529 37,4 72,74 1 |
| DR601600063012 | PN16 220 529 57,2 106,91 1 |
| Ø710 | DR601000071012 PN10 220 552 42,1 94,99 1 |
| DR601600071012 | PN16 220 552 64,5 140,32 1 |
| Ø800 | DR601000080012 PN10 220 578 47,4 129,40 1 |
| DR601600080012 | PN16 220 578 72,6 189,32 1 |
| Ø900 | DR601000090012 PN10 300 733 53,3 188,00 1 |
| Ø1000 | DR601000100012 PN10 300 762 59,3 240,00 1 |
| Ø1200 | DR601000120012 PN10 300 820 71,1 370,00 1 |
| Ø1400 | DR601000140012 PN10 400 1035 83,0 640,00 1 |
| Ø1600 | DR601000160012 PN10 400 1092 94,84 880,00 1 |
| Ø1800 | DR601000180012 PN10 400 1150 106,6 1170,00 1 |
| Ø2000 | DR601000200012 PN10 400 1208 118,4 1520,00 1 |
A fabricated fitting that provides sealing at points where HDPE pipelines pass through concrete structures and walls, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Inegal cross fitting that splits HDPE pipelines of different diameters into four directions at a 90° angle, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Equal-diameter cross fitting that branches HDPE pipelines in four directions at a 90° angle, manufactured in PN10 and PN16 pressure classes. With Fortiweld assurance.
ReviewContact us for model selection suitable for your project. We guarantee a detailed technical response within 48 hours.
