The 45° Elbow HDPE100+, which is part of the apparel additional parts group, is a durable connection element manufactured to safely change the flow direction in large-diameter polyethylene lines.
45° Elbow HDPE100+ is a prefabricated fitting developed to provide leak-tight direction changes in polyethylene pipelines between Ø200 and Ø500. It adapts to different operating conditions with PN10 and PN16 pressure classes; thanks to its HDPE100+ raw material, it offers long service life, chemical resistance, and high impact strength.
Offered with the Fortiweld assurance, this elbow is joined to the main pipe by the butt fusion welding method in gas and water transmission lines, creating a homogeneous and monolithic connection. Its wide diameter range supports standardization and ease of installation in projects.
| d | Article No Bar L Z e Weight (kg) Pack (pcs) |
|---|---|
| Ø200 | DR451000020012 PN10 130 248 11.9 2.95 1 |
| DR451600020012 | PN16 130 248 18,2 4,51 1 |
| Ø225 | DR451000022512 PN10 130 255 13.4 3.42 1 |
| DR451600022512 | PN16 130 255 20.5 5.23 1 |
| Ø250 | DR451000025012 PN10 130 260 14.8 3.85 1 |
| DR451600025012 | PN16 130 260 22.7 5.90 1 |
| Ø280 | DR451000028012 PN10 130 267 16.6 4.43 1 |
| DR451600028012 | PN16 130 267 25.4 6.78 1 |
| Ø315 | DR451000031512 PN10 170 337 18.7 6.30 1 |
| DR451600031512 | PN16 170 337 28.6 9.64 1 |
| Ø355 | DR451000035512 PN10 170 346 21.1 7.30 1 |
| DR451600035512 | PN16 170 346 32.2 11.14 1 |
| Ø400 | DR451000040012 PN10 170 357 23.7 8.46 1 |
| DR451600040012 | PN16 170 357 36.3 12.96 1 |
| Ø450 | DR451000045012 PN10 170 368 26.7 9.83 1 |
| DR451600045012 | PN16 170 368 40.9 15.05 1 |
| Ø500 | DR451000050012 PN10 170 380 29.7 11.29 1 |
| DR451600050012 | PN16 170 380 45.4 17.25 1 |
| Ø560 | DR451000056012 PN10 170 394 33.2 13.08 1 |
| DR451600056012 | PN16 170 394 50.8 20.02 1 |
| Ø630 | DR451000063012 PN10 220 488 37.4 18.25 1 |
| DR451600063012 | PN16 220 488 57.2 27.91 1 |
| Ø710 | DR451000071012 PN10 220 506 42.1 85.36 1 |
| DR451600071012 | PN16 220 506 64.5 126.10 1 |
| Ø800 | DR451000080012 PN10 250 560 47.4 110.88 1 |
| DR451600080012 | PN16 250 560 72.6 162.22 1 |
| Ø900 | DR451000090012 PN10 300 600 53.3 191.55 1 |
| Ø1000 | DR451000100012 PN10 300 670 59.3 220.00 1 |
| Ø1200 | DR451000120012 PN10 300 712 71.1 330.00 1 |
| Ø1400 | DR451000140012 PN10 400 906 83.0 575.00 1 |
| Ø1600 | DR451000160012 PN10 400 948 94.84 785.00 1 |
| Ø1800 | DR451000180012 PN10 400 990 106.6 1035.00 1 |
| Ø2000 | DR451000200012 PN10 400 1030 118.4 1330.00 1 |
A fabricated fitting that provides sealing at points where HDPE pipelines pass through concrete structures and walls, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Inegal cross fitting that splits HDPE pipelines of different diameters into four directions at a 90° angle, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Equal-diameter cross fitting that branches HDPE pipelines in four directions at a 90° angle, manufactured in PN10 and PN16 pressure classes. With Fortiweld assurance.
ReviewContact us for model selection suitable for your project. We guarantee a detailed technical response within 48 hours.
