The 11°-30° Elbow HDPE100+ is a high-strength fabricated fitting designed for small-angle direction corrections in polyethylene gas and water lines.
| d | Article No Bar L Z e Weight (kg) Pack (pcs) |
|---|---|
| Ø200 | DR111000020012 PN10 130 157 11,9 2,12 1 |
| DR111600020012 | PN16 130 157 18,2 3,33 1 |
| Ø225 | DR111000022512 PN10 130 160 13,4 3,04 1 |
| DR111600022512 | PN16 130 160 20,5 4,46 1 |
| Ø250 | DR111000025012 PN10 130 164 14,8 3,82 1 |
| DR111600025012 | PN16 130 164 22,7 5,62 1 |
| Ø280 | DR111000028012 PN10 130 168 16,6 4,86 1 |
| DR111600028012 | PN16 130 168 25,4 8,12 1 |
| Ø315 | DR111000031512 PN10 170 212 18,7 7,73 1 |
| DR111600031512 | PN16 170 212 28,6 11,38 1 |
| Ø355 | DR111000035512 PN10 170 218 21,1 10,06 1 |
| DR111600035512 | PN16 170 218 32,2 14,79 1 |
| Ø400 | DR111000040012 PN10 170 224 23,7 13,08 1 |
| DR111600040012 | PN16 170 224 36,3 19,29 1 |
| Ø450 | DR111000045012 PN10 170 230 26,7 17,01 1 |
| DR111600045012 | PN16 170 230 40,9 25,13 1 |
| Ø500 | DR111000050012 PN10 170 237 29,7 21,64 1 |
| DR111600050012 | PN16 170 237 45,4 31,86 1 |
| Ø560 | DR111000056012 PN10 170 245 33,2 32,88 1 |
| DR111600056012 | PN16 170 245 50,8 41,21 1 |
| Ø630 | DR111000063012 PN10 200 285 37,4 40,86 1 |
| DR111600063012 | PN16 200 285 57,2 60,06 1 |
| Ø710 | DR111000071012 PN10 220 320 42,1 57,22 1 |
| DR111600071012 | PN16 220 320 64,5 84,53 1 |
| Ø800 | DR111000080012 PN10 250 358 47,4 82,24 1 |
| DR111600080012 | PN16 250 358 72,6 120,33 1 |
| Ø900 | CT451000090012 PN10 300 420 53,3 115 1 |
| Ø1000 | CT451000100012 PN10 300 434 59,3 152 1 |
| Ø1200 | CT451000120012 PN10 300 460 71,1 225 1 |
| Ø1400 | CT451000140012 PN10 400 587 83,0 385 1 |
| Ø1600 | CT451000160012 PN10 400 614 94,84 525 1 |
| Ø1800 | CT451000180012 PN10 400 641 106,6 695 1 |
| Ø2000 | CT451000200012 PN10 400 668 118,4 890 1 |
A fabricated fitting that provides sealing at points where HDPE pipelines pass through concrete structures and walls, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Inegal cross fitting that splits HDPE pipelines of different diameters into four directions at a 90° angle, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Equal-diameter cross fitting that branches HDPE pipelines in four directions at a 90° angle, manufactured in PN10 and PN16 pressure classes. With Fortiweld assurance.
ReviewContact us for model selection suitable for your project. We guarantee a detailed technical response within 48 hours.
