The HDPE100+ fabricated 90° elbow securely provides a perpendicular change of direction with butt welding in large-diameter polyethylene lines.
90° Elbow HDPE100+, prefabricated fitting piece used for ninety degree directional change in large diameter polyethylene pipe lines. Manufactured by welding pipe sections together and provides full strength transition in the line.
The product is manufactured from HDPE100+ raw material in PN10 (SDR 17) and PN16 (SDR 11) pressure classes and is offered in large diameter range starting from Ø200. It is connected to the pipe line by butt fusion welding method.
| d | Article No Bar L Z e Weight (kg) Pack (pcs) |
|---|---|
| Ø200 | DR901000020012 PN10 130 410 11.9 4.86 1 |
| DR901600020012 | PN16 130 410 18.2 7.18 1 |
| Ø225 | DR901000022512 PN10 130 420 13.4 6.43 1 |
| DR901600022512 | PN16 130 420 20.5 9.43 1 |
| Ø250 | DR901000025012 PN10 130 430 14.8 8.03 1 |
| DR901600025012 | PN16 130 430 22.7 11.83 1 |
| Ø280 | DR901000028012 PN10 130 442 16.6 10.14 1 |
| DR901600028012 | PN16 130 442 25.4 15.02 1 |
| Ø315 | DR901000031512 PN10 170 543 18.7 16.53 1 |
| DR901600031512 | PN16 170 543 28.6 24.32 1 |
| Ø355 | DR901000035512 PN10 170 561 21.1 21.66 1 |
| DR901600035512 | PN16 170 561 32.2 31.85 1 |
| Ø400 | DR901000040012 PN10 170 580 23.7 29.40 1 |
| DR901600040012 | PN16 170 580 36.3 43.37 1 |
| Ø450 | DR901000045012 PN10 170 602 26.7 37.88 1 |
| DR901600045012 | PN16 170 602 40,9 55,96 1 |
| Ø500 | DR901000050012 PN10 170 624 29,7 47,74 1 |
| DR901600050012 | PN16 170 624 45,4 70,31 1 |
| Ø560 | DR901000056012 PN10 170 650 33,2 63,02 1 |
| DR901600056012 | PN16 170 650 50,8 92,92 1 |
| Ø630 | DR901000063012 PN10 220 786 37,4 97,16 1 |
| DR901600063012 | PN16 220 786 57,2 142,80 1 |
| Ø710 | DR901000071012 PN10 220 820 42,1 132,00 1 |
| DR901600071012 | PN16 220 820 64,5 195,00 1 |
| Ø800 | DR901000080012 PN10 220 860 47,4 179,20 1 |
| DR901600080012 | PN16 220 860 72,6 262,18 1 |
| Ø900 | DR901000090012 PN10 300 1160 53,3 260,00 1 |
| Ø1000 | DR901000100012 PN10 300 1210 59,3 335,00 1 |
| Ø1200 | DR901000120012 PN10 300 1310 71,1 520,00 1 |
| Ø1400 | DR901000140012 PN10 400 1646 83,0 890,00 1 |
| Ø1600 | DR901000160012 PN10 400 1746 94,84 1230,00 1 |
| Ø1800 | DR901000180012 PN10 400 1846 106,6 1645,00 1 |
| Ø2000 | DR901000200012 PN10 400 1946 118,4 2135,00 1 |
A fabricated fitting that provides sealing at points where HDPE pipelines pass through concrete structures and walls, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Inegal cross fitting that splits HDPE pipelines of different diameters into four directions at a 90° angle, manufactured in PN10 and PN16 classes. With Fortiweld assurance.
Review
Equal-diameter cross fitting that branches HDPE pipelines in four directions at a 90° angle, manufactured in PN10 and PN16 pressure classes. With Fortiweld assurance.
ReviewContact us for model selection suitable for your project. We guarantee a detailed technical response within 48 hours.
